

| Parameter | Value |
|---|---|
| BU/GN | |
| Type | Accessories |
| Cable type | Single wires |
| Application | for mounting on vehicle charging inlets |
| Cable length | 1.5 mm |
| Product type | Locking actuator |
| Charging mode | Mode 2, 3, 4 |
| Product family | CHARX connect universal |
| Cable structure | 4 x 0.5 mm² |
| Cable resistance | ≤ 37.1 Ω/m |
| Lock recognition | available |
| Charging standard | Type 2 |
| Cross section AWG | (converted acc. to IEC) |
| Operating voltage | 12 V |
| Single wire, color | BU/RD |
| Single wire, material | PVC |
| Standards/regulations | IEC 61851-1 |
| External cable diameter | 1.6 mm ±0.20 mm |
| Note number of positions | 4-pos. |
| Recommended adaptation time | 600 ms |
| Mechanical emergency release | available |
| Reverse current of the motor | max. 1.5 A |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -40 °C ... 90 °C |
| Position of the locking actuator | any |
| Typical motor current for locking | 0.25 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1 s |
| Maximum voltage for locking detection | 12 V |
| Possible power supply range at the motor | 9 V ... 16 V |
Technical specifications and performance data
Installation and operation guide