In Stock Hot Product
CHARX T1HBI12-1AC80DC200-3,0M1
CHARX T1HBI12-1AC80DC200-3,0M1 1449106 PHOENIX CONTACT CHARX connect, Vehicle Entry
$715.28USD
45 in stock
Key Specifications
:for installation in electric vehicles (EV)
Depth:117.6 mm
Width:117.6 mm
Coding:4.7 kΩ (between PE and PP)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| for installation in electric vehicles (EV) | |
| Depth | 117.6 mm |
| Width | 117.6 mm |
| Coding | 4.7 kΩ (between PE and PP) |
| Height | 90 mm |
| Number | 5 (L1, N, PE, DC+, DC-) |
| General | A protective cap is supplied as standard for the DC and AC contacts. |
| Altitude | 4000 m (above sea level) |
| Cable type | Single wires |
| Resistance | max. 1200 Ω ±5 K |
| Technology | Combined Charging System |
| Application | for charging with alternating current (AC) and with direct current (DC) |
| Material () | Plastic |
| Sensor type | PTC chain |
| Cable length | 3 m |
| Product type | Vehicle charging inlet |
| Charging mode | Mode 2, 3, 4 |
| Fixing screws | M6 |
| Mounting type | Front and rear mounting (0 to 90 degree frontal inclination possible) |
| Rated current | 80 A AC |
| Rated voltage | 250 V AC |
| Charging power | 20 kW |
| Product family | CHARX connect universal |
| Cable structure | 2 x 16 mm² |
| Color (Housing) | black (9005) |
| Insertion force | < 100 N |
| Attachment point | Sensor for the AC contacts |
| Cable resistance | ≤ 1.16 Ω/km |
| Charging current | 80 A |
| Lock recognition | available |
| Withdrawal force | < 100 N |
| Charging standard | CCS type 1 |
| Cross section AWG | (converted acc. to IEC) |
| Operating voltage | 12 V |
| Single wire, color | OG |
| Ambient temperature | -40 °C ... 130 °C (Operation) |
| Color (Mating face) | black (9005) |
| Insulation resistance | > 200 MΩ |
| Single wire, material | Silicone |
| Standards/regulations | DIN˽EN 60738-1 |
| Mounting hole diameter | 6.70 mm (ø) |
| Temperature monitoring | AC contacts: PTC chain (DIN˽EN˽60738-1) |
| External cable diameter | 9.9 mm ±0.3 mm |
| Temperature measurement | DC contacts: 2x PT1000 (DIN EN 60751) |
| Note number of positions | 4-pos. |
| Type of charging current | AC single-phase |
| Material (Contact surface) | Silver |
| Measuring range_resistance | 790 Ω ... 1420 Ω |
| Single wire, cross section | 70.00 mm² |
| Insertion/withdrawal cycles | > 10000 |
| Recommended adaptation time | 600 ms |
| Type of signal transmission | Pulse width modulation with modulated Powerline communication in accordance with ISO/IEC 15118 / DIN SPEC 70121 |
| Mechanical emergency release | available |
| Reverse current of the motor | max. 1.5 A |
| Note on the connection method | Crimp connection, cannot be disconnected |
| Service life insertion cycles | > 10000 load cycles |
| Ambient temperature (operation) | -40 °C ... 80 °C |
| Position of the locking actuator | top center |
| Typical motor current for locking | 0.25 A |
| Pause time after entry or exit path | 3 s |
| Max. dwell time with reverse current | 1 s |
| Maximum voltage for locking detection | 12 V |
| Ambient temperature (storage/transport) | -40 °C ... 85 °C |
| Possible power supply range at the motor | 9 V ... 16 V |
| Screws included in the scope of delivery | none |
| Degree of protection (Vehicle charging inlet) | IP55 (plugged in; when plugged in and ready to operate, the degree of protection is only ensued if both plug-in components are original products from Phoenix Contact or suitable standard-compliant products) |
Product Description
CHARX connect universal, Vehicle charging inlet, for charging with alternating current (AC) and with direct current (DC), CCS type 1, IEC 62196-2, IEC 62196-3, 200 A / 1000 V (DC), 80 A / 250 V (AC),
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
