In Stock Hot Product
CHARX PS-M2/825DC/1000DC/30KW
CHARX PS-M2/825DC/1000DC/30KW 1296467 PHOENIX CONTACT CHARX power basic, Fast charging module for mounting D..
$0.00USD
3472 in stock
Key Specifications
:38 A (825 V DC)
Depth:550 mm
Width:483 mm
rigid:1.5 mm² ... 16 mm²
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 38 A (825 V DC) | |
| Depth | 550 mm |
| Width | 483 mm |
| rigid | 1.5 mm² ... 16 mm² |
| Height | 134 mm |
| Locking | Locking clip |
| Derating | < 650 V DC ... 300 V DC (46 W/V) |
| Topology | Line (daisy-chain connection) |
| flexible | 1.5 mm² ... 16 mm² |
| Interface | CAN bus |
| Rack unit | 3 U |
| Efficiency | > 95 % (POut>50%) |
| Designation | Input |
| IEC 60664-1 | II |
| Noise level | < 60 dB (1 m) |
| rigid (AWG) | 15 ... 5 (Cu) |
| Internal fan | yes |
| Product type | DC power module |
| Service life | 40000 h (40 °C) |
| Input current | 48 A (650 V DC) |
| Mounting type | 19" rack mounting |
| Nominal power | 30 kW |
| Flow direction | from front to back |
| Identification | DC IN: + / - / PE |
| Product family | CHARX power basic |
| Switch-on delay | < 8 s |
| Housing material | Zn-Al alloy |
| Maximum altitude | ≤ 4000 m (Derating >2000 m: 10% / 1000 m) |
| Pollution degree | 2 |
| Protection class | I |
| Stripping length | 18 mm (rigid/flexible) |
| Connection method | Push-in connection |
| Control deviation | < 0.5 % (Voltage deviation static load change 20% ... 100%) |
| Battery technology | Li-Ion |
| Overshoot behavior | ± 3 % (Switch-on procedure) |
| Transmission speed | 125 kbps |
| Dimensional drawing | |
| Input voltage range | 300 V DC ... 825 V DC |
| Supported protocols | CAN 2.0B |
| Transmission length | max. 20 m |
| Degree of protection | IP20 |
| Electrical isolation | yes (primary/secondary) |
| Number of interfaces | 1 |
| Output current range | 0 A ... 100 A |
| Output voltage range | 30 V DC ... 1000 V DC |
| Standard designation | Electric vehicle conductive charging system - Part 1: General requirements |
| Termination resistor | 120 Ω (Terminating the end device) |
| Transmission physics | Twisted-Pair |
| Insulation resistance | > 10 MΩ |
| Standards/specifications | IEC 61851-1 |
| Inrush current limitation | < 60 A |
| Power dissipation standby | < 14 W |
| MTBF (IEC 61709, SN 29500) | > 300000 h |
| Nominal input voltage range | 650 V DC ... 825 V DC |
| Supply system configuration | DC grid (DC±, PE) |
| Ambient temperature (operation) | -40 °C ... 70 °C |
| Insulation voltage input/output | 2121 V DC |
| Overtemperature protection (OTP) | > 75 °C |
| Permissible humidity (operation) | ≤ 95 % (non-condensing) |
| EMC requirements for noise emission | EN 61000-6-3 |
| EMC requirements for noise immunity | EN 61000-6-1 |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Insulation voltage input, output / housing | 2121 V DC |
| Number of power modules as CAN bus devices | max. 48 (within one CHARX control controller) |
| Electrical isolation between input and output | yes |
| Insulation voltage signal, communication/housing | 707 V DC |
| Protection against overvoltage at the output (OVP) | > 1040 V DC |
| Insulation voltage input, output/signal, communication | 4242 V DC |
Product Description
CHARX power basic, Fast charging module for setting up DC charging stations, 19" rack mounting, CAN bus, output: 30 V DC...1000 V DC / 0 A...100 A
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
