In Stock Hot Product
CCV 2,5/ 6-GF-5,08 GYP26THRR56
CCV 2,5/ 6-GF-5,08 GYP26THRR56 1845438 PHOENIX CONTACT Housing base printed circuit board, nominal current: ..
$0.00USD
3043 in stock
Key Specifications
Step:5.08 mm
Result:Approved Test
Process:Reflow/Wave Soldering
Amplitude:0.35 mm (10 Hz ... 60.1 Hz)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Step | 5.08 mm |
| Result | Approved Test |
| Process | Reflow/Wave Soldering |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| ESD Level | (D) Electrostatically conductive |
| Width [w] | 40.59 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 14.6 mm |
| Length [l] | 8.57 mm |
| Pin Design | Linear Pin Arrangement |
| Shock Type | Semi-sinusoidal |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Plug Cycles | 25 |
| Sweep speed | 1 octave/min |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Construction | Suitable component for Through Hole Reflow |
| Product Line | COMBICON Connectors M |
| Product Type | Printed circuit board base housing |
| Hole diameter | 1.6 mm |
| Article Review | 01 |
| Belt Width [W] | 56 mm |
| Number of rows | 1 |
| Overall Height | 12 mm |
| Product Family | CCV 2.5/.. -GF |
| Thermal stress | 105 °C/168 h |
| Clamping flange | Overhead clamping (thread) |
| Color (Housing) | Grey (7042) |
| Number of poles | 6 |
| Test Directions | X, Y, and Z axes |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Number of cycles | 25 |
| Type of mounting | THR welding/wave welding |
| Coil Diameter [A] | 330 mm |
| Corrosion fatigue | 0.2 dm3UNDER2in 300 dm3/40 °C/1 cycle |
| Temple Dimensions | 1 x 1 mm |
| Tightening torque | 0.3 Nm |
| Type of packaging | 56 mm wide strap |
| Contact resistance | 1 mΩ |
| Nominal Current IN | 12 A |
| Nominal voltage UN | 320 V |
| Outer packing type | Dry bag |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Bearable AC voltage | 2.21 kV |
| Insulating material | LCP |
| Weld Pin Length [P] | 2.6 mm |
| Number of potentials | 6 |
| Contact Resistance R1 | 1 mΩ |
| Contact Resistance R2 | 1 mΩ |
| Duration of the crash | 18 ms |
| Number of connections | 6 |
| Plug-in force approx. | 8 N |
| Nominal voltage (II/2) | 400 V |
| Number of poles tested | 12 |
| Sizing voltage (III/3) | 250 V |
| Test duration per axis | 2.5 h |
| Surface Characteristics | Galvanically tinned |
| Moisture Sensitive Level | MSL 1 |
| Data on Welding Processes | Processing in reflow soldering processes in accordance with IEC 60068-2-58 or DIN EN 61760-1 (current version, respectively)Moisture Sensitive Level (MSL) = 1 according to IPC/JEDEC J-STD-020-C |
| Insulating material group | IIIa |
| Welding cycles. by reflux | 3 |
| CTI according to IEC 60112 | 175 |
| Dimensioning voltage (III/2) | 320 V |
| Ambient Temperature (Service) | -40 °C ... 105 °C (depending on the rating curve) |
| Classification Temperature Tc | 260 °C |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| External Coil Measurements [W2] | 62.4 mm |
| Nominal transient voltage (II/2) | 4 kV |
| Sizing Insulation Voltage (II/2) | 400 V |
| Nominal transient voltage (III/2) | 4 kV |
| Nominal transient voltage (III/3) | 4 kV |
| Sizing Insulation Voltage (III/2) | 320 V |
| Sizing Insulation Voltage (III/3) | 250 V |
| Minimum creepage line value (II/2) | 4 mm |
| Bearable shock voltage at sea level | 4.8 kV |
| Metal surface weld area (top layer) | Tin (3 - 5 μm Sn) |
| Minimum creepage line value (III/2) | 3.2 mm |
| Minimum creepage line value (III/3) | 4 mm |
| Number of Solder Pins Per Potential | 1 |
| Observation regarding the operation | According to DIN EN 61984, COMBICON connectors are connectors without switching power (COC). In the event of use as prescribed, they must not be plugged in or unplugged under voltage or under load. |
| Contact Holder UsedRequirement >20 N | Approved Test |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Dimensioning transient voltage (II/2) | 4 kV |
| Flammability class according to UL 94 | V0 |
| Power when unplugging by pole approx. | 6 N |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Dimensioning transient voltage (III/3) | 4 kV |
| Metal surface contact area (top layer) | Tin (3 - 5 μm Sn) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Metal Surface Contact Area (Middle Layer) | Nickel (1.3 - 3 μm Ni) |
| Metal Surface Welding Area (Middle Layer) | Nickel (1.3 - 3 μm Ni) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 175 |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
Product Description
Printed circuit board base housing, nominal section: 2.5 mm², color: gray, nominal current: 12 A, nominal voltage (III/2): 320 V, contact surface: Tin, contact type: Male, number of potentials: 6, num
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
