In Stock Hot Product
BCP-381F-5 GN BD:1-5
BCP-381F-5 GN BD:1-5 1110896 PHOENIX CONTACT Connector for printed circuit board, number of poles: 5, pitch:..
$0.00USD
4556 in stock
Key Specifications
:0.2 mm² / flexible / > 10 N
Link:Screw connection with cage
Step:3.81 mm
note:Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| 0.2 mm² / flexible / > 10 N | |
| Link | Screw connection with cage |
| Step | 3.81 mm |
| note | Complies with WEEE/RoHS, no thread-like materials according to IEC 60068-2-82/JEDEC JESD 201 |
| type | Standard |
| Result | Test passed |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Frequency | 10 - 150 - 10 Hz |
| Packaging | Packed in carton |
| Width [w] | 29.44 mm |
| Height [h] | 11.1 mm |
| Length [l] | 16.1 mm |
| Sweep Speed | 1 octave/min |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Color (Case) | White Green (6019) |
| Product Line | COMBICON Connectors S |
| Product Type | Printed circuit board connector |
| Clamping Type | Screw locking |
| Fixing flange | Screw flange |
| Article review | 01 |
| Number of rows | 1 |
| Product Family | BCP-F |
| Surface Finish | Hot-dip galvanizing |
| Number of poles | 5 |
| Test Directions | X, Y, and Z axis |
| Connector system | BASICLINE 1.5 |
| Contact Material | Cu Alloy |
| Fixed AC voltage | 1.39 kV |
| Mass Resistivity | 2 mΩ |
| Number of cycles | 25 |
| Rated Current IN | 8 A |
| Rated voltage UN | 160 V |
| Tightening torque | 0.3 Nm |
| Manoeuvring cycles | 25 |
| Test Specification | DIN EN 60999-1 (VDE 0609-1):2000-12 |
| Dimensioned Drawing | |
| Insulation material | PA |
| Mass Resistivity R1 | 2 mΩ |
| Mass Resistivity R2 | 2.5 mΩ |
| Nominal cross-section | 1.5 mm² |
| Sizing voltage (II/2) | 320 V |
| Number of poles tested | 20 |
| Sizing voltage (III/2) | 160 V |
| Sizing voltage (III/3) | 160 V |
| Test duration per axle | 2.5 h |
| Contact Connection Type | female |
| Stress due to corrosion | 0.2 dm3KNOW2on 300 dm3/40 °C/1 cycle |
| Appliance type screw head | Longitudinal slit (L) |
| Insulation Material Group | The |
| CTI according to IEC 60112 | 600 |
| Conductor cross-section AWG | 24 ... 16 |
| Rated Impulse Voltage (II/2) | 2.5 kV |
| Buffer Gauge a x b / diameter | 2.4 mm x 1.5 mm / 1.6 mm |
| Minimum creepage value (II/2) | 1.6 mm |
| Rated impulse voltage (III/2) | 2.5 kV |
| Rated impulse voltage (III/3) | 2.5 kV |
| Rigid conductor cross-section | 0.2 mm² ... 1.5 mm² |
| Sizing Impulse Voltage (II/2) | 2.5 kV |
| Ambient temperature (mounting) | -5 °C ... 100 °C |
| Minimum creepage value (III/2) | 1.5 mm |
| Minimum creepage value (III/3) | 2 mm |
| Rated Isolation Voltage (II/2) | 320 V |
| Sizing Impulse Voltage (III/2) | 2.5 kV |
| Sizing impulse voltage (III/3) | 2.5 kV |
| Tensile force per pole approx. | 4 N |
| Ambient temperature (operating) | -40 °C ... 100 °C (depending on derating curve) |
| Rated Isolation Voltage (III/2) | 160 V |
| Flexible conductor cross-section | 0.2 mm² ... 1.5 mm² |
| Insertion force per pole approx. | 7 N |
| Rated insulation voltage (III/3) | 160 V |
| Stress due to the effect of heat | 100 °C/168 h |
| Conductor/board connection direction | 0 ° |
| Length of the section to be stripped | 7 mm |
| Ambient temperature (storage/transport) | -40 °C ... 70 °C |
| Combustibility class according to UL 94 | V0 |
| Vertical impulse tension above sea level | 2.95 kV |
| Relative humidity (transport and storage) | 30 % ... 70 % |
| Metal surface contact zone (surface layer) | Tin (4 - 8 μm Sn) |
| 2 conductors of identical cross-section, rigid | 0.2 mm² ... 0.5 mm² |
| Insulation Resistance Between Contiguous Poles | 1012Ω |
| Metal Surface, Connection Point (Surface Layer) | Tin (4 - 8 μm Sn) |
| 2 conductors of identical flexible cross-section | 0.2 mm² ... 0.75 mm² |
| Minimum creepage value - inhomogeneous range (II/2) | 1.5 mm |
| Minimum creepage value - inhomogeneous range (III/2) | 1.5 mm |
| Minimum clearance value - inhomogeneous range (III/3) | 1.5 mm |
| Resistance to surface currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Brinell hardness test temperature according to EN 60695-10-2 | 125 °C |
| GWIT filament ignition temperature according to EN 60695-2-13 | 775 |
| Flammability index of GWFI filament according to EN 60695-2-12 | 850 |
| Flexible conductor cross-section with mounted lug and plastic collar | 0.25 mm² ... 0.5 mm² |
| Flexible conductor cross-section with cable lug without plastic collar | 0.25 mm² ... 1.5 mm² |
| Conductor cross-section/conductor type/tensile force nominal value/actual value | 0.2 mm² / rigid / > 10 N |
| 2 conductors of the same flexible cross-section with ferrule without plastic collar | 0.25 mm² ... 0.34 mm² |
| 2 conductors of identical cross-section flexible with TWIN ferrule with plastic collar | 0.5 mm² ... 0.5 mm² |
Product Description
Connector for printed circuit board, nominal section: 1.5 mm², color: whitish green, nominal current: 8 A, nominal voltage (III/2): 160 V, contact surface: Tin, contact type: Female, number of rows: 1
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
