In Stock Hot Product
BCH-500VS-6 GN
BCH-500VS- 6 GN 5446121 PHOENIX CONTACT Housing base,nominal Current: 12 A,rated Voltage (III/2): 320 V,N. º..
$0.00USD
4916 in stock
Key Specifications
Step:5 mm
Result:Approved Test
Amplitude:0.35 mm (10 Hz ... 60.1 Hz)
Width [w]:32 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Step | 5 mm |
| Result | Approved Test |
| Amplitude | 0.35 mm (10 Hz ... 60.1 Hz) |
| Width [w] | 32 mm |
| frequency | 10 - 150 - 10 Hz |
| Height [h] | 15.9 mm |
| Length [l] | 8.6 mm |
| Pin Design | Linear Pin Arrangement |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Plug Cycles | 25 |
| Sweep speed | 1 octave/min |
| Acceleration | 5g (60.1 Hz ... 150 Hz) |
| Construction | Standard |
| Product Line | COMBICON Connectors M |
| Product Type | Printed circuit board base housing |
| Hole diameter | 1.4 mm |
| Article Review | 01 |
| Number of rows | 1 |
| Overall Height | 12 mm |
| Product Family | BCH-VS |
| Thermal stress | 100 °C/168 h |
| Clamping flange | without |
| Color (Housing) | off-white green (6019) |
| Number of poles | 6 |
| Test Directions | X, Y, and Z axes |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Number of cycles | 25 |
| Type of mounting | Wave soldering |
| Corrosion fatigue | 0.2 dm3UNDER2in 300 dm3/40 °C/1 cycle |
| Temple Dimensions | 1 x 1 mm |
| Type of packaging | Boxed Packaging |
| Contact resistance | 3.7 mΩ |
| Nominal Current IN | 12 A |
| Nominal voltage UN | 320 V |
| Test Specification | DIN EN 60512-1-1:2003-01 |
| Bearable AC voltage | 2.21 kV |
| Insulating material | PA |
| Weld Pin Length [P] | 3.9 mm |
| Number of potentials | 6 |
| Contact Resistance R1 | 3.7 mΩ |
| Contact Resistance R2 | 3.7 mΩ |
| Number of connections | 6 |
| Plug-in force approx. | 10 N |
| Nominal voltage (II/2) | 400 V |
| Number of poles tested | 16 |
| Sizing voltage (III/3) | 250 V |
| Test duration per axis | 2.5 h |
| Surface Characteristics | Galvanically tinned |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Dimensioning voltage (III/2) | 320 V |
| Ambient Temperature (Service) | -40 °C ... 100 °C (depending on the rating curve) |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Nominal transient voltage (II/2) | 4 kV |
| Sizing Insulation Voltage (II/2) | 400 V |
| Nominal transient voltage (III/2) | 4 kV |
| Nominal transient voltage (III/3) | 4 kV |
| Sizing Insulation Voltage (III/2) | 320 V |
| Sizing Insulation Voltage (III/3) | 250 V |
| Minimum creepage line value (II/2) | 3 mm |
| Bearable shock voltage at sea level | 4.8 kV |
| Metal surface weld area (top layer) | Tin (4 - 8 μm Sn) |
| Minimum creepage line value (III/2) | 3 mm |
| Minimum creepage line value (III/3) | 3.2 mm |
| Number of Solder Pins Per Potential | 1 |
| Observation regarding the operation | According to DIN EN 61984, COMBICON connectors are connectors without switching power (COC). In the event of use as prescribed, they must not be plugged in or unplugged under voltage or under load. |
| Insulation Resistance Adjacent Poles | > 5 MΩ |
| Dimensioning transient voltage (II/2) | 4 kV |
| Flammability class according to UL 94 | V0 |
| Power when unplugging by pole approx. | 7 N |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Dimensioning transient voltage (III/3) | 4 kV |
| Metal surface contact area (top layer) | Tin (4 - 8 μm Sn) |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Metal Surface Contact Area (Middle Layer) | Nickel (1.5 - 4 μm Ni) |
| Metal Surface Welding Area (Middle Layer) | Nickel (1.5 - 4 μm Ni) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
Product Description
Printed circuit board base housing, nominal section: 2.5 mm², color: whitish green, nominal current: 12 A, nominal voltage (III/2): 320 V, contact surface: Tin, contact type: Male, number of potential
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
