In Stock Hot Product
BC-500X14-13 GN
BC-500X14-13 GN 5453462 PHOENIX CONTACT PCB terminal, rated current: 17.5 A, rated voltage (III/2): 400 V, r..
$4.73USD
2160 in stock
Key Specifications
Step:5 mm
Width [w]:65 mm
Height [h]:17.3 mm
Length [l]:9.8 mm
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| Step | 5 mm |
| Width [w] | 65 mm |
| Height [h] | 17.3 mm |
| Length [l] | 9.8 mm |
| Pin Design | Linear Pin Arrangement |
| Observation | WEEE/RoHS compliant, filament-free according to IEC 60068-2-82/JEDEC JESD 201 |
| Peel Length | 7 mm |
| Construction | Card terminal, alignable |
| Product Line | COMBICON Terminals S |
| Product Type | Printed Circuit Board Terminal |
| Hole diameter | 1.3 mm |
| Number of rows | 1 |
| Overall Height | 13.8 mm |
| Product Family | BC-X14 |
| Color (Housing) | off-white green (6019) |
| Connection type | Screw connection with traction capsule |
| Nominal Section | 1.5 mm² |
| Number of poles | 13 |
| Contact material | Cu Alloy |
| Dimension Scheme | |
| Type of mounting | Wave soldering |
| Temple Dimensions | 0.9 x 0.9 mm |
| Tightening torque | 0.5 Nm ... 0.6 Nm |
| Type of packaging | Boxed Packaging |
| Nominal Current IN | 17.5 A |
| Nominal voltage UN | 400 V |
| Test Specification | DIN EN 60664-1 (VDE 0110-1):2008-01 |
| Degree of pollution | 3 |
| Insulating material | PA |
| Weld Pin Length [P] | 3.5 mm |
| AWG Conductor Section | 26 ... 14 |
| Nominal voltage (II/2) | 630 V |
| Sizing voltage (III/3) | 250 V |
| Drive shape: screw head | Philipps-Recess with longitudinal groove (H1L) |
| Rigid conductor section | 0.14 mm² ... 2.5 mm² |
| Surface Characteristics | Galvanically tinned |
| A note on the application | For the safe connection of conductors, a defined torque must always be maintained. In particular, in two- and three-pole PCB terminals, the individual solder pin cannot control it at every point of contact. The terminal blocks therefore require assistance when connecting the conductors (manual fixing, bracketing in the housing). |
| Insulating material group | I |
| CTI according to IEC 60112 | 600 |
| Flexible conductor section | 0.14 mm² ... 1.5 mm² |
| Dimensioning voltage (III/2) | 400 V |
| Ambient Temperature (Service) | -40 °C ... 100 °C (Based on current/derating load capacity curve) |
| Ambient Temperature (Mounting) | -5 °C ... 100 °C |
| Nominal transient voltage (II/2) | 4 kV |
| Sizing Insulation Voltage (II/2) | 630 V |
| Nominal transient voltage (III/2) | 4 kV |
| Nominal transient voltage (III/3) | 4 kV |
| Sizing Insulation Voltage (III/2) | 400 V |
| Sizing Insulation Voltage (III/3) | 250 V |
| Minimum creepage line value (II/2) | 3.2 mm |
| Metal surface weld area (top layer) | Tin (5 - 7 μm Sn) |
| Minimum creepage line value (III/2) | 3 mm |
| Minimum creepage line value (III/3) | 3.2 mm |
| Number of Solder Pins Per Potential | 1 |
| Dimensioning transient voltage (II/2) | 4 kV |
| Flammability class according to UL 94 | V0 |
| Dimensioning Transient Voltage (III/2) | 4 kV |
| Dimensioning transient voltage (III/3) | 4 kV |
| Ambient Temperature (Storage/Transport) | -40 °C ... 70 °C |
| Metal Surface Welding Area (Middle Layer) | Nickel (2 - 3 μm Ni) |
| 2 conductors with the same cross-section, rigid | 0.14 mm² ... 1 mm² |
| Metal surface of the terminal point (top layer) | Tin (5 - 7 μm Sn) |
| Metal surface of the terminal point (interlayer) | Nickel (2 - 3 μm Ni) |
| Relative humidity of the air (storage/transport) | 30 % ... 70 % |
| 2 conductors with the same cross-section, flexible | 0.14 mm² ... 0.75 mm² |
| Ball hardness test temperature according to EN 60695-10-2 | 125 °C |
| Resistance to leakage currents (DIN EN 60112 (VDE 0303-11)) | CTI 600 |
| Flexible conductor section with toe cap, with plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Flexible conductor section with toe cap, without plastic sleeve | 0.25 mm² ... 1.5 mm² |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (II/2) | 3 mm |
| Minimum Value of Air Insulation Distance - Non-Homogeneous Field (III/2) | 3 mm |
| minimum value of air insulation distance - non-homogeneous field (III/3) | 3 mm |
| Flammability number of GWFI incandescent filaments according to EN 60695-2-12 | 850 |
| Ignition temperature of incandescent filaments GWIT according to EN 60695-2-13 | 775 |
| 2 conductors of equal cross-section, flexible with toe cap, without plastic sleeve | 0.25 mm² ... 0.5 mm² |
| 2 conductors with the same cross-section, flexible with TWIN toe cap with plastic sleeve | 0.5 mm² ... 1 mm² |
Product Description
More details
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
