

| Parameter | Value |
|---|---|
| GTIN | 4055626459288 |
| Orderkey | 2702911 |
| Packing unit | 1 pc |
| (Interfaces) | Polarity reversal protection of the supply voltage |
| (Analog outputs) | Functional earth ground 500 V AC 50 Hz 1 min. |
| Country of origin | DE (Germany) |
| Custom tariff number | 85389091 |
| Designation (General) | Axioline F local bus |
| (Electrical isolation) | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| Designation (Interfaces) | Supply for analog modules (UA) |
| Impedance (Analog inputs) | > 43 Ω (per channel) |
| No. of channels (General) | 2 |
| Characteristics (Contacts) | can be parameterized: 350 μV/V ... 6500 μV/V |
| Connection method (General) | Bus base module |
| Depth (Key Commercial Data) | 54 mm |
| Number of inputs (Contacts) | 2 |
| Supply voltage (Interfaces) | 24 V DC |
| Width (Key Commercial Data) | 35 mm |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Bridge voltage U0 (Contacts) | 5 V |
| Height (Key Commercial Data) | 126.1 mm |
| Transmission speed (General) | 100 Mbps |
| Test section (Analog outputs) | Logic 500 V AC 50 Hz 1 min. |
| Output current (Analog inputs) | max. 115 mA (per channel) |
| Output voltage (Analog inputs) | typ. 5 V |
| Power consumption (Interfaces) | typ. 2.6 W (with maximum load: 8 weighing cells with 350 Ω per channel) |
| Quantity (Axioline potentials) | 2 (Ka1-Kb1, Ka2-Kb2) |
| Bridge difference Ud (Contacts) | Measuring range specified by selecting the characteristic |
| Net weight (Ambient conditions) | 187.7 g |
| Type of protection (Interfaces) | Surge protection of the supply voltage |
| Connection technology (Contacts) | 6 or 4-wire, twisted pair shielded cable |
| Current consumption (Interfaces) | typ. 25 mA (with typical load: 1 weighing cell with 350 Ω, only one channel loaded) |
| Degree of protection (Dimensions) | IP20 |
| Description (Axioline potentials) | Floating N/O contact |
| Number of outputs (Analog inputs) | 2 |
| Supply voltage range (Interfaces) | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Mounting type (Ambient conditions) | DIN rail |
| Output description (Analog inputs) | Jumper supply |
| Description of the input (Contacts) | Input channels for strain gauge |
| Operating mode (Ambient conditions) | Process data mode with 6 words |
| Weight per Piece (excluding packing) | 187.700 g |
| Air pressure (operation) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| Mechanical tests (Electrical isolation) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| Protection class (Electrical isolation) | III, IEC 61140, EN 61140, VDE 0140-1 |
| Contact resistance (Axioline potentials) | < 1 Ω (typical) |
| Measured value representation (Contacts) | 32 bits |
| Note on dimensions (Key Commercial Data) | The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). |
| Dimensional drawing (Key Commercial Data) | |
| Typical response time (Axioline potentials) | typ. 0.2 ms (opening) |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 60 °C |
| Air pressure (storage/transport) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Note on weight specifications (Ambient conditions) | with connectors and bus base module |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Permissible humidity (storage/transport) (Dimensions) | 5 % ... 95 % (non-condensing) |
Technical specifications and performance data
Installation and operation guide