

| Parameter | Value |
|---|---|
| GTIN | 4046356909587 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2702006 |
| Catalog page | Page 120 (C-6-2017) |
| Depth (Note) | 54 mm |
| Packing unit | 1 pc |
| Width (Note) | 35 mm |
| (Dimensions) | -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) |
| (Interfaces) | max. 240 mA |
| Height (Note) | 126.1 mm |
| Country of origin | DE (Germany) |
| Data bits (General) | 5 ... 8 |
| Interface (General) | RS-232, RS-485, RS-422 |
| Stop bits (General) | 1 or 2 |
| Custom tariff number | 85176200 |
| Designation (General) | Axioline F local bus |
| Input buffer (General) | 4 kByte |
| (Electrical isolation) | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| Output buffer (General) | 1 kByte |
| Designation (Interfaces) | Axioline F local bus supply (UBus) |
| No. of channels (General) | 2 |
| Note on dimensions (Note) | The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). |
| Dimensional drawing (Note) | |
| Connection method (General) | Push-in connection |
| Supply voltage (Interfaces) | 5 V DC (via bus base module) |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Net weight (Connection data) | 187.4 g |
| Parity (Axioline potentials) | Even, odd or no parity |
| Transmission speed (General) | 100 Mbps |
| Protocols supported (General) | Transparent, end-to-end, XON/XOFF, Modbus/RTU (master support) |
| (Serial input/output channel) | 5 V supply (I/O)/functional earth ground 500 V AC 50 Hz 1 min. |
| Termination resistor (General) | active, integrated |
| Transmission physics (General) | Copper |
| Mounting type (Connection data) | DIN rail |
| Current consumption (Interfaces) | typ. 200 mA |
| Designation (Ambient conditions) | Axioline F connector |
| Degree of protection (Dimensions) | IP20 |
| Weight per Piece (excluding packing) | 187.400 g |
| Air pressure (operation) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Stripping length (Ambient conditions) | 8 mm |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| Connection method (Ambient conditions) | Push-in connection |
| Diagnostics messages (Connection data) | I/O supply failure Yes |
| Mechanical tests (Electrical isolation) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| Protection class (Electrical isolation) | III, IEC 61140, EN 61140, VDE 0140-1 |
| Transmission type (Axioline potentials) | Transparent mode, end-to-end mode, XON/XOFF, Modbus/RTU |
| Test section (Serial input/output channel) | 5 V supply (logic)/5 V supply (I/O) 500 V AC 50 Hz 1 min. |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 60 °C (Standard) |
| Air pressure (storage/transport) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Note on weight specifications (Connection data) | with connectors and bus base module |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section AWG max. (Ambient conditions) | 16 |
| Conductor cross section AWG min. (Ambient conditions) | 24 |
| Permissible humidity (storage/transport) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Conductor cross section solid max. (Ambient conditions) | 1.5 mm² |
| Conductor cross section solid min. (Ambient conditions) | 0.2 mm² |
| Conductor cross section flexible max. (Ambient conditions) | 1.5 mm² |
| Conductor cross section flexible min. (Ambient conditions) | 0.2 mm² |
Technical specifications and performance data
Installation and operation guide