In Stock Hot Product
AXL F DO32/1 XC 1F
AXL F DO32/1 XC 1F 2701230 PHOENIX CONTACT I/O module
$0.00USD
4863 in stock
Key Specifications
GTIN:4046356730518
Note:Made to Order (non-returnable)
Orderkey:2701230
Catalog page:Page 109 (C-6-2017)
Supplier Information
Products: 0
Usually ships within 2-3 business days
Quality Guaranteed
Fast Shipping
Technical Support
Technical Specifications
| Parameter | Value |
|---|---|
| GTIN | 4046356730518 |
| Note | Made to Order (non-returnable) |
| Orderkey | 2701230 |
| Catalog page | Page 109 (C-6-2017) |
| Depth (Note) | 54 mm |
| Packing unit | 1 pc |
| Width (Note) | 53.6 mm |
| (Dimensions) | -40 °C ... 70 °C (Extended, see section “Tested successfully: use under extreme ambient conditions” in the data sheet.) |
| (Interfaces) | max. 16 A (as of HW 02, protection against polarity reversal up to 5 A) |
| Height (Note) | 126.1 mm |
| Caption (Note) | Dimensions |
| Country of origin | DE (Germany) |
| (Digital outputs) | 24 V supply (I/O) / functional earth ground 500 V AC 50 Hz 1 min. |
| Custom tariff number | 85389091 |
| Designation (General) | Axioline F local bus |
| (Electrical isolation) | Continuous shock according to EN 60068-2-27/IEC 60068-2-27 10g |
| Protection (Interfaces) | max. 8 A (up to HW 01, protection against polarity reversal up to 5 A) |
| Designation (Interfaces) | Supply for digital output modules (UO) |
| No. of channels (General) | 2 |
| Note on dimensions (Note) | The depth is valid when a TH 35-7,5 DIN rail is used (according to EN 60715). |
| Dimensional drawing (Note) | |
| Connection method (General) | Bus base module |
| Supply voltage (Interfaces) | 24 V DC |
| (Standards and Regulations) | No hazardous substances above threshold values |
| Net weight (Connection data) | 240 g |
| Transmission speed (General) | 100 Mbps |
| Power consumption (Interfaces) | max. 240 W (up to HW 01, of which 1.5 W constitute internal losses) |
| Test section (Digital outputs) | 5 V communications power (logic), 24 V supply (I/O) 500 V AC 50 Hz 1 min. |
| Mounting type (Connection data) | DIN rail |
| Type of protection (Interfaces) | Surge protection of the supply voltage |
| Current consumption (Interfaces) | max. 8 A (up to HW 01, fuse externally) |
| Designation (Ambient conditions) | Axioline F connector |
| Degree of protection (Dimensions) | IP20 |
| Output name (Axioline potentials) | Digital outputs |
| Supply voltage range (Interfaces) | 19.2 V DC ... 30 V DC (including all tolerances, including ripple) |
| Output voltage (Axioline potentials) | 24 V |
| Weight per Piece (excluding packing) | 240.000 g |
| Air pressure (operation) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Stripping length (Ambient conditions) | 8 mm |
| China RoHS (Standards and Regulations) | Environmentally friendly use period: unlimited = EFUP-e |
| Connection method (Ambient conditions) | Push-in connection |
| REACh SVHC (Standards and Regulations) | Lead 7439-92-1 |
| Connection method (Axioline potentials) | Push-in connection |
| Mechanical tests (Electrical isolation) | Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 5g |
| Number of outputs (Axioline potentials) | 32 |
| Protection class (Electrical isolation) | III, IEC 61140, EN 61140, VDE 0140-1 |
| Nominal load, lamp (Axioline potentials) | max. 12 W (at nominal voltage) |
| Type of protection (Axioline potentials) | Short-circuit protection, overload protection of the outputs |
| Nominal load, ohmic (Axioline potentials) | max. 12 W (48 Ω, with nominal voltage) |
| Connection technology (Axioline potentials) | 1-wire |
| Ambient temperature (operation) (Dimensions) | -25 °C ... 60 °C (Standard) |
| Nominal output voltage (Axioline potentials) | 24 V DC |
| Air pressure (storage/transport) (Dimensions) | 70 kPa ... 106 kPa (up to 3000 m above sea level) |
| Nominal load, inductive (Axioline potentials) | max. 12 VA (1.2 H, 48 Ω, with nominal voltage) |
| Permissible humidity (operation) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Utilization restriction (Key Commercial Data) | EMC: class A product, see manufacturer's declaration in the download area |
| Note on weight specifications (Connection data) | with connectors and bus base module |
| Note on the connection method (Ambient conditions) | Please observe the information provided on conductor cross sections in the “Axioline F: system and installation” user manual. |
| Ambient temperature (storage/transport) (Dimensions) | -40 °C ... 85 °C |
| Conductor cross section AWG max. (Ambient conditions) | 16 |
| Conductor cross section AWG min. (Ambient conditions) | 24 |
| Permissible humidity (storage/transport) (Dimensions) | 5 % ... 95 % (non-condensing) |
| Conductor cross section solid max. (Ambient conditions) | 1.5 mm² |
| Conductor cross section solid min. (Ambient conditions) | 0.2 mm² |
| Maximum output current per module (Axioline potentials) | 8 A (up to HW 01, fuse externally) |
| Maximum output current per channel (Axioline potentials) | 500 mA |
| Conductor cross section flexible max. (Ambient conditions) | 1.5 mm² |
| Conductor cross section flexible min. (Ambient conditions) | 0.2 mm² |
Product Description
AxiolineF, Digital output module, Digital outputs:32, 24 VDC, 500 mA, connection technology:1 conductor, Extreme Condition variant, transmission speed on the local bus:100 MBit/s, protection index: IP
Key Features
- Industrial grade quality
- RoHS compliant
- CE certified
- 1-year warranty
Product Documents
Datasheet
Technical specifications and performance data
User Manual
Installation and operation guide
