


| Parameter | Value |
|---|---|
| Depth | 173 mm |
| Width | 55 mm |
| Height | 295 mm |
| Protocol | |
| — solid | 0.7 ... 35 mm², 2x (0.75 ... 25 mm²) |
| — upwards | 50 mm |
| ● at AC-3 | |
| — forwards | 10 mm |
| — stranded | 0.7 ... 35 mm², 2x (0.75 ... 25 mm²) |
| Mounting type | snap-on mounting |
| — Backwards | 0 mm |
| — downwards | 0 mm |
| Operating power | |
| — at the side | 0 mm |
| ● rated value | 690 V |
| Product function | |
| Required spacing | |
| Shock resistance | 8g |
| ● on the front | IP20 |
| Equipment marking | |
| Mounting position | with vertical mounting surface +/-90° rotatable, with vertical mounting surface +/- 22.5° tiltable to the front and back |
| Operating current | |
| Operating voltage | |
| Insulation voltage | |
| Type of assignment | 2 |
| product brand name | SIRIUS |
| ● during storage | -55 ... +80 °C |
| ● for live parts | |
| Ambient temperature | |
| Degree of pollution | 3 |
| Product designation | non-fused load feeder |
| Protection class IP | |
| Size of load feeder | S2 |
| ● during operation | -20 ... +70 °C |
| Design of the product | direct starter |
| Number of CO contacts | |
| Number of NC contacts | |
| Number of NO contacts | |
| Protocol is supported | |
| ● for main contacts | |
| ● for grounded parts | |
| Number of digital inputs | 0 |
| — at 400 V rated value | 35 A |
| ● at 400 V rated value | 50 kA |
| ● at 50 Hz rated value | 230 V |
| ● at 60 Hz rated value | 230 V |
| ● of contactor typical | 10 000 000 |
| ● AS-interface protocol | No |
| ● acc. to DIN EN 61346-2 | Q |
| ● acc. to DIN EN 81346-2 | Q |
| ● for auxiliary contacts | 1 |
| No-load switching frequency | 15 1/s |
| Type of the motor protection | bimetal |
| ● Short circuit protection | Yes |
| ● for main current circuit | screw-type terminals |
| ● single or multi-stranded | 0.7 ... 35 mm² |
| Manufacturer's article number | |
| Type of electrical connection | |
| ● of the supplied contactor | 3RT1035-1AL20 |
| Control supply voltage 1 at AC | |
| ● with side-by-side mounting | |
| Design of the switching contact | electromechanical |
| ● at AC-3 rated value maximum | 400 V |
| ● of the supplied link module | 3RA1931-1AA00 |
| Control supply voltage frequency 1 | 50 ... 60 Hz |
| Design of short-circuit protection | circuit-breakers |
| Product extension Auxiliary switch | Yes |
| Product function Bus communication | No |
| ● is supported PROFINET protocol | No |
| Surge voltage resistance rated value | 6 kV |
| ● of the supplied circuit-breakers | 3RV1031-4FA10 |
| ● is supported PROFIBUS DP protocol | No |
| ● at AWG conductors for main contacts | 2x (30 ... 2) |
| Number of poles for main current circuit | 3 |
| Mechanical service life (switching cycles) | |
| Type of connectable conductor cross-sections | |
| — finely stranded with core end processing | 0.75 ... 25 mm², 2x (0.75 ... 16 mm²) |
| ● finely stranded with core end processing | 0.75 ... 25 mm² |
| Type of voltage of the control supply voltage | AC |
| ● of the supplied standard mounting rail adapter | 3RA1932-1AA00 |
| Connectable conductor cross-section for main contacts | |
| Maximum short-circuit current breaking capacity (Icu) | |
| AWG number as coded connectable conductor cross section | |
| Installation altitude at height above sea level maximum | 2 000 m |
| ● acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 | Q |
| Adjustable pick-up value current of the current-dependent overload release | 28 ... 40 A |
Technical specifications and performance data
Installation and operation guide